• WISHLIST
  • MY CART

    My Cart

Zhiyun-Tech

ZHIYUN CRANE & GIMBAL REMOTE


  • ₱2,495.00

  • SRP

    PRODUCT HIGHLIGHTS
    • For Zhiyun Crane 2 Zhiyun Crane V2 Zhiyun Crane-M Smooth-Q Smooth 3 Smooth-II Rider-M Gimbal Stabilizer. Note It does NOT Support Follow Focus Function of Crane-2 Currently
    • Power/Shutter Button: Power On/Off the Controller by Pressing it for 1 to 2 sec. After the Gimbal is connected to the camera, under Camera Mode, Half-Press activates Focus, then Completely Press the button to take photos; Double Click the button Completely can switch between Record Function and Camera Function.
    • Power Button + Shifter Lever: Push the Shifter Lever in W direction simultaneously when powering up to enter Slave Mode. This allows firmware upgrade of the remote controller through mobile APP(Requires Bluetooth pairing with the smartphone using Zhiyun Assistant).
    • Power Button + MODE Button: Press the MODE Button simultaneously when powering up to opeate quick pairing with the nearest stabilizer.
    • Joystick: Control Camera's Movement. Shifter Lever: Allows Focusing Control of the Camera.


    In Stock

Product Information

Specification

Accessories
Power Requirements Charging Voltage: 5V Charging Current: 100mA Operating Current: 4.2mA
Range Effective Control Distance: 10m/394Inch(Without Blockage)
General
Color Black
Warranty 1 Year Manufacturer
Power/Battery Built-in Polymer Lithium Battery Capacity: 150mAh
  • For Zhiyun Crane 2 Zhiyun Crane V2 Zhiyun Crane-M Smooth-Q Smooth 3 Smooth-II Rider-M Gimbal Stabilizer. Note It does NOT Support Follow Focus Function of Crane-2 Currently
  • Power/Shutter Button: Power On/Off the Controller by Pressing it for 1 to 2 sec. After the Gimbal is connected to the camera, under Camera Mode, Half-Press activates Focus, then Completely Press the button to take photos; Double Click the button Completely can switch between Record Function and Camera Function.
  • Power Button + Shifter Lever: Push the Shifter Lever in W direction simultaneously when powering up to enter Slave Mode. This allows firmware upgrade of the remote controller through mobile APP(Requires Bluetooth pairing with the smartphone using Zhiyun Assistant).
  • Power Button + MODE Button: Press the MODE Button simultaneously when powering up to opeate quick pairing with the nearest stabilizer.
  • Joystick: Control Camera's Movement. Shifter Lever: Allows Focusing Control of the Camera.


Bluetooth Indicator
No Connection: Continuous flashing
Connected: Shines solid light
Power Level Indicator
90%-100%: Quick Flash for 4 times each second
75%-90%: Quick Flash for 3 times each second
55%-75%: Quick Flash for 2 times each second
30%-55%: Quick Flash once each second
0%-30%: Quick Flashing
Charging Indicator
Charging: RED Light
Charging Complete: GREE Light